End Mills
Unlike conventional PCD diamond, DIAbide can be applied to the surfaces of endmills, drills, inserts and other types of carbide fabricated tools. Producing these tools is an exacting process conducted in high tech CVD reactors over an extended period of time. Decatur Diamond supplies the most consistent, highest quality tools for machining of difficult, non-metallic, highly abrasive workpieces.
Dimensions are in inches
| Part/EDP Number | Diameter | LOC | OAL | Number of Flutes | Type | Reach | Radius |
|---|---|---|---|---|---|---|---|
| 12566 | 1/32 | 3/64 | 2-1/2 | 4 | CRP | 1/2 | 0.01 |
| 12726 | 1/32 | 3/32 | 3 | 4 | CRP | 1/2 | 0.005 |
| 12727 | 3/64 | 9/64 | 3 | 4 | CRP | 9/16 | 0.01 |
| 12567 | 3/64 | 3/64 | 2-1/2 | 4 | CRP | 5/8 | 0.01 |
| 12568 | 1/16 | 3/32 | 2-1/2 | 4 | CRP | 5/8 | 0.01 |
| 12728 | 1/16 | 3/16 | 3 | 4 | CRP | 1 | 0.01 |
| 12569 | 5/64 | 5/64 | 2-1/2 | 4 | CRP | 5/8 | 0.01 |
| 12570 | 3/32 | 9/64 | 2-1/2 | 4 | CRP | 1 | 0.01 |
| 12729 | 3/32 | 9/32 | 3 | 4 | CRP | 1-1/2 | 0.01 |
| 12455 | 1/8 | 1/8 | 4 | 4 | CRP | 1 | 0.015 |
| 12730 | 1/8 | 3/8 | 3 | 4 | CRP | 2 | 0.01 |
| 12853 | 1/8 | 1/8 | 3 | 4 | CRP | 1-1/2 | 0.015 |
| 12731 | 1/8 | 3/4 | 3 | 4 | CRP | 1-1/2 | 0.02 |
| 12153 | 1/8 | 3/4 | 3 | 4 | CRP | 1-1/2 | 0.03 |
| 12581 | 3/16 | 3/16 | 4 | 4 | CRP | 1-1/2 | 0.02 |
| 12864 | 1/4 | 1/4 | 4 | 4 | CRP | 1 | 0.015 |
| 12458 | 1/4 | 1/4 | 4 | 4 | CRP | 2 | 0.062 |
| 12574 | 1/4 | 1/4 | 4 | 4 | CRP | 2 | 0.03 |
| 12155 | 1/4 | 1-1/2 | 4 | 4 | CRP | 2-1/2 | 0.03 |
| 12463 | 1/4 | 1/4 | 4 | 4 | CRP | 2 | 0.02 |
| 12577 | 1/4 | 1/4 | 6 | 4 | CRP | 3 | 0.02 |
| 12732 | 1/4 | 1 | 4 | 4 | CRP | 2-1/2 | 0.03 |
| 12733 | 1/4 | 1 | 4 | 4 | CRP | 2-1/2 | 0.06 |
| 12576 | 3/8 | 3/8 | 4 | 4 | CRP | 2 | 0.02 |
| 12578 | 3/8 | 3/8 | 6 | 4 | CRP | 3 | 0.02 |
| 12862 | 1/2 | 1/2 | 4 | 4 | CRP | 2 | 0.015 |
| 12579 | 1/2 | 1/2 | 6 | 4 | CRP | 3 | 0.02 |